Wrought Iron Fence Installation in Denton, TX
A wrought iron fence marks your property line without blocking the view. It adds security and curb appeal at the same time. It is a popular choice for front yards, pools, and homes that back up to open land or a greenbelt. We build wrought iron fences for homes and properties across Denton, Corinth and Sanger.
Call 214.991.1298 or request a free estimate. We will set a time to see your property. We measure, talk through options, and give you a written estimate.
What People Mean by Wrought Iron
Most fences people call wrought iron today are made from steel. They are built in the classic wrought iron style, with vertical pickets, rails, and posts. Some have decorative tops or rings. This style is often called ornamental iron. It gives you the classic look and the strength of metal.
Why Choose a Wrought Iron Fence
Here is why homeowners pick iron:
Open view. You can see through it. That keeps your yard feeling open and shows off your home.
Security. Metal pickets are hard to climb or push through. Spacing can help keep pets and small kids inside.
Curb appeal. Iron gives a clean, finished look to a front yard or entry.
Low upkeep. With a good coating and basic upkeep, an iron fence can last a long time.
Works with other fences. Iron pairs well with cedar privacy fences in the backyard.
Where Wrought Iron Works Best
Front Yards
A front yard fence should look good from the street. Iron does that without hiding your home. Many homeowners add a matching walk gate at the front path.
Pools
Pools need a safe barrier. Iron lets you see the pool from the house and the yard. Pool fences often have rules on height, gaps and gate latches. Check your city and HOA rules before you build, and tell us it is for a pool during your estimate.
Backyards With a View
If your yard backs up to a field, pond, park or greenbelt, a privacy fence blocks the view you paid for. Iron keeps the view and still marks your line. Some HOAs require iron on lots like these.
Walk Gates and Entries
Iron walk gates can be built as part of the fence, such as at a front path or a side yard. A gate takes more stress than the rest of the fence, so the gate posts matter. We talk through the options with you at your estimate.
Styles and Options
Iron fences come in many looks. During your estimate we help you choose:
Height. Common choices range from short front yard fences to taller fences for pools and security.
Picket tops. Flat top, pressed spear, or other decorative tops.
Picket spacing. Closer spacing helps with small pets and kids.
Rails. Two rail or three rail designs change the look and strength.
Gates. Walk gates as part of the fence.
Color. Black is the most common. Ask about other finishes.
Our Wrought Iron Fence Process
Free estimate. Call 214.991.1298 or fill out the estimate form.
Measure and plan. We walk the fence line with you. We look at slopes, corners, gates, and how the fence meets your house or other fences.
Written estimate. You get a clear written estimate with the style and layout.
Check the rules. Check HOA rules and any city permit needs. This matters even more for pools.
Utility marking. Underground lines should be marked before digging. In Texas you can call 811.
Install. We set posts, mount panels, and hang gates.
Walk through. We check gate swing and latches with you and clean up.
Iron on Sloped Yards
Many yards in the area are not flat. Iron panels can be stepped down a slope in level sections. Some panels can also follow the slope at an angle. The right choice depends on how steep the ground is and the look you want. We look at this during your estimate.
Caring for an Iron Fence
Iron does not need much care. A few simple habits help:
Rinse off dirt and lawn clippings now and then.
Keep sprinklers from soaking the fence every day.
Look for chips or scratches in the coating. Touch them up early so rust does not start.
Keep vines off the pickets.
Check gate hinges and latches and tighten as needed.
If a panel gets bent or a post gets hit, have it looked at early. Damage can chip the coating and let rust start.
Replacing an Old Wood Fence with Iron
Many iron fences go in where an old wood fence used to be. If your wood fence is rotting or leaning, you can switch to iron when you replace it. A replacement job includes taking out the old fence. See our fence replacement page. Check your HOA rules before you change materials.
Questions to Think About Before Your Estimate
Thinking about these before we visit helps the estimate go faster:
Where should the fence start and stop?
Do you want it to mark a line, add security, or keep pets in?
Is there a pool, a slope, or a tight corner along the line?
Where do you want walk gates?
Does your HOA have rules on style, height or color?
Do you want iron in front and cedar in back?
Iron or Cedar?
Pick iron when you want an open view, a front yard fence, or a pool barrier you can see through. Pick cedar when you want privacy. Many homes use both. We can help you plan which goes where.
HOA and City Rules
HOAs often set rules for fence style, height and color. Some require iron on certain lots. The City of Denton may have rules on height and placement, and some projects need a permit. Pool fences may have extra rules. Check with your HOA and the city before you build.
Areas We Serve
We install iron fences in Denton, Corinth and Sanger. Commercial property? See our commercial fences page.
Wrought Iron Fence FAQ
Is wrought iron real iron? Most modern iron style fences are made from steel. They have the classic look and the strength of metal.
Will my iron fence rust? Bare metal can rust. A good coating helps protect it. Touch up chips and scratches early to keep rust from starting.
Can an iron fence keep my dog in? It can if the picket spacing is close enough for your dog and there are no gaps at the bottom. Tell us about your pets during the estimate.
Can I use iron for a pool fence? Yes, iron is a common pool fence choice. Pool fences often have rules on height, gaps and gates. Check your city and HOA rules first.
Can you add a gate to my fence? Yes. We can talk through walk gates at your estimate.
How do I get a price? We price each job after we see it. Call 214.991.1298 or request a free estimate.
Get a Free Wrought Iron Fence Estimate
Ready to add iron to your home? Call 214.991.1298 or fill out the estimate form. We will set a time to see your property, measure, and give you a written estimate.

